| PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF Notes : 1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this Section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are : (a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked;
(b) presented together; and
(c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. 2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely incidental to the primary use of the goods, fall in Chapter 49. CHAPTER 39 PLASTICS AND ARTICLES THEREOF
Notes : 1. Throughout this Schedule the expression “plastics” means those Materials of headings 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence. Throughout this Schedule any reference to “plastics” are includes vulcanized fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI.
2. This Chapter does not cover: (a) Waxes of heading 2712 or 3404 :
(b) Separate chemically defined organic compounds (Chapter 29);
(c) Heparin or its salts (heading 3001);
(d) Solutions (other than collodions ) consisting of any of the products specified in headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50% of the weight of the solution (heading 3208); stampings foils of heading 3212;
(e) Organic surface-active agents or preparation of headings 3402;
(f) Run gums of ester gums (heading 3806);
(g) Diagnostic or laboratory reagents on a backing of plastics (heading 3822);
(h) Synthetic rubber, as defined for the purpose of Chapter 40, or articles thereof;
(ij) Saddlery or harness (heading 4201) or trunks, suitcases , handbags or
other containers of heading 4202;
(k) Plaits, wickerwork or other articles of Chapter 46;
(l) Wall coverings of heading 4814;
(m) Goods of section XI (textiles and textile articles);
(n) Articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrella, walking-sticks, whips, riding-crops or parts thereof);
(o) Imitation jewelry of heading 7117;
(p) Articles of Section XVI (machines and mechanical or electrical appliances);
(q) Parts if aircraft or vehicles of Section XVII;
(r) Articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments);
(s) Articles of Chapter 91 (for example, clock or watch cases);
(t) Articles of Chapter 92 (for example, musical instruments or parts thereof);
(u) Articles of Chapter 94 (for example, furniture, lamps and lighting fittings, illuminated signs, prefabricated buildings);
(v) Articles of Chapter 95 (for example, toys, games, sports requisites); or(w) Articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouth pieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils). 3. Headings 3901 to 3911 apply only to goods of a kind produced by Chemical synthesis; falling in the following categories : (a) Liquid synthetic polyolefins of which less than 60% by volume distils at 300oC, after conversion to 1,013 millibars when a reduced-pressure distillation method is used (headings 3901 and 3902);
(b) Resins, not highly polymerised, of the coumarone-indene type (heading 3911);
(c) Other synthetic polymers with an average of at least 5 monomer units;
(d) Silicones (heading 3910);
(e) Resols (heading 3909) and other prepolymers. 4. The expressions “copolymers” covers all polymers in which no single monomer unit contributes 95% or more by weight to the total polymer content. For the purposes of this Chapter, except where the context otherwise requires, copolymers (including co-polycondensates , co-polyaddition products, block copolymers and graft copolymers) and polymer bends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this Note, constituents comonomer units of polymers falling in the same heading shall be taken together. If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration. 5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to he unmodified polymer. This provision does not apply to graft copolymers. 6. In headings 3901 to 3914 the expression “ primary forms” applies only to the following forms: (a) Liquids and pastes, including dispersions (emulsions and suspensions) and solutions;
(b) Blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms. 7. Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 to 3914) 8. For the purposes of heading 3917, the expressions “ tubes, pipes and hoses” means hollow products, whether semi-manufacturers or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes ). This expression also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purpose of heading 3918, the expression “wall or ceiling coverings of plastics” applies to products in rolls, of a width not less than 45cm. Suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper , the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression “ plates, sheets, film and strip” applies only to plates, sheets, film, foil and strip (other than those of chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use). 11. Heading 3925 applies only to the following articles, not being products covered by any of the earlier heading of sub-chapter II: (a) Reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 l :
(b) Structural elements used, for example, in floors, walls or partitions, ceilings or roofs :
(c) Gutters and fittings thereof :
(d) Doors, windows and their frames and thresholds for doors :
(e) Balconies, balustrades, fencing, gates and similar barriers :
(f) Shutters, blinds (including Venetian blinds) and similar articles and parts and fittings thereof :
(g) Large-scale shelving for assembly and permanent installation, for example, in shops, workshops , warehouses;
(h) Ornamental architectural features, for example, flutings, cupolas, dovecotes ; and
(i) Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of builders, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates. Sub-heading Notes:- 1. Within any one heading of this chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions : (a) Where there is a sub heading named “ other” in the same series : (1) The designation in a subheading of a polymer by the prefix “ poly” (e.g., polyethylene and polyamide –6, 6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95% or more by weight of the total polymer content; (2) The copolymers named in subheadings 3901 30, 3903 20, 3903 30 and 3904 30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95% or more by weight of the total polymer content. (3) Chemically modified polymer are to be classified in the subheading named “ other”, provided that the chemically modified polymers are not mere specifically covered by an other subheading. (4) Polymers not meeting (1), (2) or (3) above are to be classified in the sub heading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared; (b) Where there is no subheading named “ other “ in the same series : (1) Polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared. (2) Chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer. Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions. 2. For the purposes of sub-heading 3920 43, the term “plasticisers” includes secondary plasticisers. | ______________________________________________________________________________________ | | Exim Code | Item Description | Policy | Policy Conditions | | ______________________________________________________________________________________ | | 3901 | Polymers of ethylene, in primary forms | | 3901 10 | Polyethylene having a specific gravity of less than 0.94 : | | | | 3901 10 10 | Linear low density polyethylene (LLDPE) | Free | | | 3901 10 90 | Other | Free | | | 3901 20 00 | Polyethylene having a specific gravity of 0.94 or more | Free | | | 3901 30 00 | Ethylene-vinyl acetate copolymers | Free | | | 3901 90 | Other: | | | | 3901 90 10 | Linear medium density polyethylene (LMDPE) | Free | | | 3901 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3902 | Polymers of propylene or of other olefins, in primary forms | | 3902 10 00 | Polypropylene | Free | | | 3902 20 00 | Poly iso- butylene | Free | | | 3902 30 00 | Propylene copolymers | Free | | | 3902 90 00 | Other | Free | | | ______________________________________________________________________________________ | | 3903 | Polymers of styrene, in primary forms
Polystyrene: | | 3903 11 00 | Expansible | Free | | | 3903 19 | Other: | | | | 3903 19 10 | Moulding Powder | Free | | | 3903 19 90 | Other | Free | | | 3903 20 00 | Styrene-acrylonitrile (SAN) copolymers | Free | | | 3903 30 00 | Acrylonitrile-butadine-styrene (ABS) copolymers
Other: | Free | | | 3903 90 10 | Copolymers, solely of styrene with allyl aolcohol, of any acetyl value of 175 or more | Free | | | 3903 90 20 | Brominated polystyrene, containing by weight 58% or more but not more than 71% of bromine, in one of the forms mentioned in Note 6(b) to this Chapter | Free | | | 3903 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3904 | Polymers of vinyl chloride or of other halogenated olefins, in primary forms | | 3904 00 | Poly(vinyl chloride), not mixed with any other substances
Other poly(vinyl chloride): | | | | 3904 10 10 | Binders for pigments | Free | | | 3904 10 90 | Other | Free | | | 3904 21 | Non-plasticised: | | | | 3904 21 10 | Poly(vinyl Chloride) resins | Free | | | 3904 21 90 | Other | Free | | | 3904 22 | Plasticised: | | | | 3904 22 10 | Poly(vinyl Chloride) (PVC) Resins (emulsion grade) | Free | | | 3904 22 90 | Other | Free | | | 3904 30 | Vinyl chloride-vinyl acetate copolymers: | | | | 3904 30 10 | Poly(vinyl derivatives) | Free | | | 3904 30 90 | Other | Free | | | | | | | | 3904 40 00 | Other Vinyl chloride copolymers
Vinylidene chloride polymers: | Free | | | 3904 50 10 | Copolymer of vinylidene chloride with acrylonitrite, in the form of expansible beads of a diameter of 4 micrometers or more but not more than 20 micrometers | Free | | | 3904 50 90 | Other
Fluro-polymers: | | | | 3904 61 00 | Polytetrafluroethylene
Other: | Free | | | 3904 69 10 | Poly (vinyl fluoride), in one of the forms mentioned in Note 6(b) to this Chapter | Free | | | 3904 69 90 | Other | | | | 3904 90 00 | Other | Free | | | ______________________________________________________________________________________ | | 3905 | Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms
Poly(vinyl acetate) : | | 3905 12 | In aqueous dispersion: | | | | 3905 12 10 | Poly(vinyl acetate) (PVA), moulding material | Free | | | 3905 12 20 | Poly(vinyl acetate) resins | Free | | | 3905 12 90 | Other | Free | | | 3905 19 | Other : | | | | 3905 19 10 | Poly(vinyl Acetate) (PVA) moulding material | Free | | | 3905 19 20 | Poly(vinyl Acetate) and resins | Free | | | 3905 19 90 | Other
Vinyl acetate copolymers : | Free | | | 3905 21 00 | In aqueous dispersion | Free | | | 3905 29 00 | Other | Free | | | 3905 30 00 | Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups
Other: | Free | | | 3905 91 00 | Copolymers | Free | | | 3905 99 | Other : | | | | | | | | | 3905 99 10 | Poly(vinyl pirolidone) (p alcohol) | Free | | | 3905 99 90 | Other | Free | | | ______________________________________________________________________________________ | | 3906 | Acrylic polymers in primary forms
Polymethyl methacrylate | | 3906 10 10 | Binders for pigments or inks | Free | | | 3906 10 90 | Other | Free | | | 3906 90 | Other : | | | | 3906 90 10 | Acrylic resins | Free | | | 3906 90 20 | Polyacrylate moulding powder | Free | | | 3906 90 30 | Copolymers of acrylonitrile | Free | | | 3906 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3907 | Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallylesters and other polyesters, in primary forms | | 3907 10 00 | Polyacetals | Free | | | 3907 20 | Other polyethers: | Free | | | 3907 20 10 | Poly (ether alcohols) | Free | | | 3907 20 90 | Other | Free | | | 3907 30 | Epoxide Resins : | | | | 3907 30 10 | Epoxy resins | Free | | | 3907 30 90 | Others | Free | | | 3907 40 00 | Polycarbonates | Free | | | 3907 50 00 | Alkyd resins | Free | | | 3907 60 | Poly(ethylene terpthalate ): | Free | | | 3907 60 10 | Having an intrinsic viscosity of less than 0.64 dl/g | Free | | | 3907 60 20 | Having an intrinsic viscosity of not less than 0.64 dl/g and not greater than 0.72 dl/g | Free | | | 3907 60 90 | Other (including clean, colourless grades)
Other polyesters: | Free | | | 3907 91 | Unsaturated : | | | | 3907 91 10 | Maleic resins | Free | | | 3907 91 20 | Polyester or contract resins | Free | | | 3907 91 30 | Fumeric Resins | Free | | | 3907 91 40 | Diallylphthalate resins | Free | | | 3907 91 50 | Poly (butylene terepthalate) | Free | | | 3907 91 90 | Other | Free | | | 3907 99 | Other : | | | | 3907 99 10 | Diallyl phthalate resins | Free | | | 3907 99 20 | Poly(butylene Terepthalate) | Free | | | 3907 99 90 | Other | Free | | | ______________________________________________________________________________________ | | 3908 | Polyamides in primary forms | | 3908 10 | Polyamide –6,-11,- 12, -6.6, 6.9, -6, 10 or 6,-12: | | | | 3908 10 10 | Nylon moulding powder | Free | | | 3908 10 90 | Other | Free | | | 3908 90 | Other : | | | | 3908 90 10 | Nylon moulding powder | Free | | | 3908 90 20 | Nylon in other primary forms | Free | | | 3908 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3909 | Amino-resins,Phenolic Resins and polyurethanes, in primary forms | | 3909 10 | Urea resins; thiourea resins : | | | | 3909 10 10 | Urea formaldehyde moulding powder | Free | | | 3909 10 90 | Other | Free | | | 3909 20 | Melamine resins: | | | | 3909 20 10 | Melamine formaldehyde resins | Free | | | 3909 20 90 | Other | Free | | | 3909 30 | Other amino-resins: | | | | 3909 30 10 | Poly(phenylene oxide) | Free | | | 3909 30 90 | Other | Free | | | 3909 40 | Phenolic resins : | | | | 3909 40 10 | Cresol formaldehyde oxide | Free | | | 3909 40 20 | Phenol formaldehyde moulding powder | Free | | | 3909 40 30 | Alkyl Phenol formaldehyde resins | Free | | | 3909 40 40 | Ketonic resins | Free | | | 3909 40 50 | Phenoxi resins | Free | | | 3909 40 60 | Terpene phenolic resins | Free | | | 3909 40 90 | Other | Free | | | 3909 50 00 | Polyurethanes | | | | ______________________________________________________________________________________ | | 3910 | SILICONES IN PRIMARY FORMS | | 3910 00 | Silicones in primary forms | | | | 3910 00 10 | Silicone resins | Free | | | 3910 00 20 | Silicone oil | Free | | | 3910 00 90 | Other | Free | | | ______________________________________________________________________________________ | | | | 3911 | Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in Note 3 to this Chapter, not elsewhere specified or included, in primary forms | | 3911 10 | Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes: | | | | 3911 10 10 | Coumarone-indene resins | Free | | | 3911 10 90 | Other | Free | | | 3911 90 | Other: | | | | 3911 90 10 | Polysulphones | Free | | | 3911 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3912 | Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms
Cellulose acetates : | | 3912 11 | Non-plasticised: | | | | 3912 11 10 | Cellulose acetate flakes | Free | | | 3912 11 20 | Cellulose acetate moulding powder | Free | | | 3912 11 30 | Cellulose acetobutyrate moulding powder | Free | | | 3912 11 40 | Cellulose nitrate, dynamic grade | Free | | | 3912 11 90 | Other | Free | | | 3912 12 | Plasticised : | | | | 3912 12 10 | Cellulose acetate flakes | Free | | | 3912 12 20 | Cellulose acetate moulding powder | Free | | | 3912 12 30 | Cellulose acetobutyrate moulding powder | Free | | | 3912 12 90 | Other | Free | | | 3912 20 | Cellulose nitrates (including collodions):
Non-plasticised: | | | | 3912 20 11 | Moulding powders | Free | | | 3912 20 19 | Other
Plasticised : | Free | | | 3912 20 21 | Moulding powders | Free | | | 3912 20 29 | Other
Cellulose ethers: | Free | | | 3912 31 00 | Carboxymethyl cellulose and its salts | Free | | | | | | | | 3912 39 | Other :
Non-plascised: | | | | 3912 39 11 | Ethyl cellulose, | Free | | | 3912 39 12 | Methyl cellulose | Free | | | 3912 39 19 | Other cellulose ethers
Plasticised: | Free | | | 3912 39 21 | Ethyl cellulose | Free | | | 3912 39 22 | Methyl cellulose | Free | | | 3912 39 29 | Other cellulose ether | Free | | | 3912 90 | Other: | | | | 3912 90 10 | Cellulose Propionate and aceto propionate non plasticised | Free | | | 3912 90 20 | Viscose sponge | Free | | | 3912 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3913 | Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms | | 3913 10 | Alginic acid, its salts and esters : | | | | 3913 10 10 | Sodium Alginate | Free | | | 3913 10 90 | Other | Free | | | 3913 90 | Other :
Chemical derivatives of natural rubber: | | | | 3913 90 11 | Chlorinated Rubber | Free | | | 3913 90 19 | Other | Free | | | 3913 90 20 | Hardened proteins (such as hardened casein, gelatin etc) | Free | | | 3913 90 30 | Dextran | Free | | | 3913 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3914 | Ion–exchangers based on polymers of headings3901 to 3913, in primary forms | | 3914 00 | Ion–exchangers based on polymers of headings3901 to 3913, in primary forms: | | | | 3914 00 10 | Ion-exchangers of the condensation, polycondensation or polyaddition type | Free | | | 3914 00 20 | Ion-exchangers of polymerisation or co-polymerisation type | Free | | | 3914 00 90 | Other
II. –WASTE, PARINGS AND SCRAP; SEMI-MANUFACTURES; ARTICLES
| Free | | | ______________________________________________________________________________________ | | 3915 | Waste, parings and scrap, of plastics | | 3915 10 00 | Of polymers of ethylene | Restricted | | | 3915 20 00 | Of polymers of styrene | Restricted | | | 3915 30 | Of polymers of vinyl chloride: | | | | 3915 30 10 | Of co-polymers of vinyl chloride | Restricted | | | 3915 30 90 | Other | Restricted | | | 3915 90 | Of other plastics : | | | | 3915 90 10 | Of polypropylene
Of polymers of vinyl acetate : | Restricted | | | 3915 90 21 | Of co-polymers of vinyl acetate | Restricted | | | 3915 90 29 | Other | Restricted | | | 3915 90 30 | Of acrylic polymers and methyacrylic co-polymers
Of alkyds, polyesters and epoxide resins : | Restricted | | | 3915 90 41 | Of alkyds and polyesters | Restricted | | | 3915 90 42 | Of PET Bottles | Free | | | 3915 90 49 | Of epoxide resins | Restricted | | | 3915 90 50 | Of Polyamides
Of Amino resins and phenolic resins and polyurethanes : | Restricted | | | 3915 90 61 | Of phenoplast | Restricted | | | 3915 90 62 | Of aminoplast | Restricted | | | 3915 90 63 | Of polyurethanes
Of cellulose and its chemical derivatives : | Restricted | | | 3915 90 71 | Of regenerated cellulose | Restricted | | | 3915 90 72 | Cellulose plastic waste such as cellulose nitrates film scrap non- plasticised | Restricted | | | 3915 90 73 | Cellulose plastic waste such as cellulose nitrates plasticised | Restricted | | | 3915 90 74 | Cellulose plastic waste such as cellulose acetate film scrap non plasticised | Restricted | | | | | | | | 3915 90 75 | Cellulose plastic waste film as such cellulose acetate plasticised | Restricted | | | 3915 90 90 | Other | Restricted | | | ______________________________________________________________________________________ | | 3916 | Monafilament of which any cross-sectional dimension exceeds 1mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics | | 3916 10 | Of polymers of ethylene : | | | | 3916 10 10 | Rods of polyethylene | Free | | | 3916 10 20 | Canes | Free | | | 3916 10 90 | Other | Free | | | 3916 20 | Of polymers of vinyl chloride
Of poly(vinyl chloride) copolymers: | | | | 3916 20 11 | Canes | Free | | | 3916 20 19 | Other
Other: | Free | | | 3916 20 91 | Canes | Free | | | 3916 20 99 | Other | Free | | | 3916 90 | Of other plastics : | | | | 3916 90 10 | Canes
Other :
Of phenoplast, Aminoplast, Alkyds & Polyesters, Polyamides, Polyurethanes, Epoxide-resins (including waste & scrap), Polypropylene and Acrylic, methacrylic and acrylomethacrylic polymers : | Free | | | 3916 90 21 | Of Phenoplast | Free | | | 3916 90 22 | Of Aminoplast | Free | | | 3916 90 23 | Of Alkyds and polysters | Free | | | 3916 90 24 | Of Polyamides | Free | | | 3916 90 25 | Of Polyurethanes | Free | | | 3916 90 26 | Of Epoxide-resins (including waste and Scrap) | Free | | | 3916 90 27 | Of Polypropylene | Free | | | 3916 90 28 | Of Acrylicmethacrylic and acrylomethcrylic polymers
Of polymerisation and copolymerisation products of polystyrene and polymethyl methacrylate : | Free | | | | | | | | 3916 90 31 | Of polymerisation and copolymerisation products of polystyrene | Free | | | 3916 90 32 | Of polymethyl methacrylate | Free | | | 3916 90 40 | Of regenerated cellulose | Free | | | 3916 90 50 | Of cellulose nitrate and celluloid, whether or not plasticized | Free | | | 3916 90 60 | Of Vulcanized fibre | Free | | | 3916 90 70 | Of Cellulose acetate and acetate butyrate, whether or not plasticized | Free | | | 3916 90 80 | Of Vinyl plastic | Free | | | 3916 90 90 | Of other polymerisation and copolymerisation products | Free | | | _________________________________________________________________________________ | | 3917 | Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics
Artificial guts (sausage casings) of hardened protein or of cellulosic materials | | 3917 10 10 | Of hardened protein | Free | | | 3917 10 20 | Of cellulosic materials
Tubes, pipes and hoses, rigid: | Free | | | 3917 21 | Of polymers of ethylene : | | | | 3917 21 10 | Tubes of polyethylene | Free | | | 3917 21 90 | Other | Free | | | 3917 22 00 | Of polymers of propylene | Free | | | 3917 23 | Of polymers of vinyl chloride : | | | | 3917 23 10 | Seamless tubes | Free | | | 3917 23 90 | Other | Free | | | 3917 29 | Of other plastics : | | | | 3917 29 10 | Seamless tubes of copolymers of vinyl acetate and vinyl chloride | Free | | | 3917 29 20 | Seamless tubes of polymers and copolymers of polystyrene | Free | | | 3917 29 30 | Tubes of cellulose nitrate and celluloid, whether or not plasticised | Free | | | 3917 29 40 | Tubes of cellulose acetate or acetate butyrate | Free | | | 3917 29 50 | Tubes of vinyl plastics | Free | | | 3917 29 90 | Other
Other tubes, pipes and hoses: | Free | | | 3917 31 00 | Flexible tubes, pipes and hoses, having a minimum burst pressure of 27.6 Mpa
Other, not reinforced or otherwise combined with other materials, without fittings: | Free | | | 3917 32 10 | Of condensation or rearrangement polymerisation products, whether or not chemically modified | Free | | | 3917 32 20 | Of addition polymerisation products | Free | | | 3917 32 90 | Other | Free | | | 3917 33 00 | Other, not reinforced or otherwise combined with other materials, with fittings | Free | | | 3917 39 | Other | | | | 3917 39 10 | Of condensation or reaggangement polymerisation products, whether or not chemically modified | Free | | | 3917 39 20 | Of addition polymerisation products | Free | | | 3917 39 90 | Other | Free | | | 3917 40 00 | Fittings | Free | | | ______________________________________________________________________________________ | | 3918 | Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in Note 9 to this Chapter | | 3918 10 | Of polymers of vinyl chloride | | | | 3918 10 10 | Wall or ceiling coverings combined with knitted or woven fabrics, nonwovens or felts | Free | | | 3918 10 90 | Other | Free | | | 3918 90 | Of other plastics : | | | | 3918 90 10 | Floor coverings of linoxyn | Free | | | 3918 90 20 | Wall or ceiling coverings combined with knitted or woven fabrics, non wovens or felts | Free | | | 3918 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3919 | Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls | | 3919 10 00 | In rolls of width not exceeding 20 cm | Free | | | 3919 90 | Other : | | | | 3919 90 10 | Plastic stickers, whether or not printed, embossed, and or impregnated. | Free | | | 3919 90 20 | Cellulose adhesive tape | Free | | | 3919 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3920 | Other plates, sheets, film, foil and strip, of plastics, non-cellular and not-reinforced, laminated, supported or similarly combined with other materials | | 3920 10 | Of polymers of ehtylene:
Sheets of polyethylene: | | | | 3920 10 11 | Rigid, plain | Free | | | 3920 10 12 | Flexible, plain | Free | | | 3920 10 19 | Other
Other : | Free | | | 3920 10 91 | Rigid, plain | Free | | | 3920 10 92 | Flexible, plain | Free | | | 3920 10 99 | Other | Free | | | 3920 20 | Of polymers of propylene : | | | | 3920 20 10 | Rigid, plain | Free | | | 3920 20 20 | Flexible, plain | Free | | | 3920 20 90 | Other | Free | | | 3920 30 | Of polymers of styrene : | | | | 3920 30 10 | Rigid, plain | Free | | | 3920 30 20 | Flexible, plain | Free | | | 3920 30 90 | Other
Of polymers of vinyl chloride: | Free | | | 3920 43 00 | Containing by weight not less than 6% of plasticizers | Free | | | 3920 49 00 | Other
Of acrylic polymers: | Free | | | 3920 51 | Of poly(methyl methacrylate):
Sheets : | | | | 3920 51 11 | Rigid, plain | Free | | | 3920 51 12 | Flexible, plain | Free | | | 3920 51 19 | Other
Other : | Free | | | 3920 51 91 | Rigid, plain | Free | | | 3920 51 92 | Flexible, plain | Free | | | 3920 51 99 | Other | Free | | | 3920 59 | Other :
Polyacrylate Sheets | | | | 3920 59 11 | Rigid, plain | Free | | | 3920 59 12 | Flexible, plain | Free | | | 3920 59 19 | Other
Other : | Free | | | 3920 59 91 | Rigid, plain | Free | | | 3920 59 92 | Flexible, plain | Free | | | 3920 59 99 | Other
Of polycarbonates, alkyd resins, polyallyl esters or other polyesters : | Free | | | 3920 61 | Of polycarbonates : | | | | 3920 61 10 | Rigid, plain | Free | | | 3920 61 20 | Flexible, plain | Free | | | 3920 61 90 | Other | Free | | | 3920 62 | Of poly(ethylene terephthalate): | | | | 3920 62 10 | Rigid, plain | Free | | | 3920 62 20 | Flexible, plain | Free | | | 3920 62 90 | Other | Free | | | 3920 63 | Of Unsaturated polyesters : | | | | 3920 63 10 | Rigid, plain | Free | | | 3920 63 20 | Flexible, plain | Free | | | 3920 63 90 | Other | Free | | | 3920 69 | Of other polyesters:
Packaging film | | | | 3920 69 11 | Rigid, plain | Free | | | 3920 69 12 | Flexible, plain | Free | | | 3920 69 19 | Other
Sun and/or dust control film: | Free | | | 3920 69 21 | Rigid, plain | Free | | | 3920 69 22 | Flexible, plain | Free | | | 3920 69 29 | Other
Other film : | Free | | | 3920 69 31 | Rigid, plain | Free | | | 3920 69 32 | Flexible, plain | Free | | | 3920 69 39 | Other
Other: | Free | | | 3920 69 91 | Rigid, plain | Free | | | 3920 69 92 | Flexible, plain | Free | | | 3920 69 99 | Other
Of cellulose or its chemical derivatives: | Free | | | 3920 71 | Of regenerated cellulose:
Cello phone transparent | | | | 3920 71 11 | Film | Free | | | 3920 71 19 | Other
Sheets of cellulose nitrate and celluloid whether or not plasticized | Free | | | 3920 71 21 | Plain | | | | 3920 71 29 | Other
Other: | | | | 3920 71 91 | Rigid, plain | Free | | | 3920 71 92 | Flexible, Plain | Free | | | 3920 71 99 | Other | Free | | | 3920 72 | Of Vulcanised fibre : | | | | 3920 72 10 | Rigid, plain | Free | | | 3920 72 20 | Flexible, plain | Free | | | 3920 72 90 | Other | Free | | | 3920 73 | Of cellulose acetate
Sheet of cellulose acetate, non plasticized : | | | | 3920 73 11 | Rigid, plain | Free | | | 3920 73 12 | Flexible, plain | Free | | | 3920 73 19 | Other
Sheet of cellulose acetate (plasticized) : | Free | | | 3920 73 21 | Rigid, plain | Free | | | 3920 73 22 | Flexible, plain | Free | | | 3920 73 29 | Other
Other : | Free | | | 3920 73 91 | Rigid, plain | Free | | | 3920 73 92 | Flexible, plain | Free | | | 3920 73 99 | Other | Free | | | 3920 79 | Of other cellulose derivatives :
Sheets of cellulose nitrate and celluloid, whether or not plasticized: | | | | 3920 79 11 | Rigid, plain | Free | | | 3920 79 12 | Flexible, plain | Free | | | | | | | | 3920 79 19 | Other
Other : | Free | | | 3920 79 91 | Rigid , plain | Free | | | 3920 79 92 | Flexible, plain | Free | | | 3920 79 99 | Other | Free | | | 3920 91 | Of other plastics:
Of poly(vinyl butyral): | | | | 3920 91 11 | Rigid, plain | Free | | | 3920 91 12 | Flexible, plain | Free | | | 3920 91 19 | Other | Free | | | 3920 92 | Of polyamides:
Poly(amide fluoride) film : | | | | 3920 92 11 | Rigid, plain | Free | | | 3920 92 12 | Flexible, plain | Free | | | 3920 92 19 | Other
Other : | Free | | | 3920 92 91 | Rigid, plain | Free | | | 3920 92 92 | Flexible, plain | Free | | | 3920 92 99 | Other | Free | | | 3920 93 | Of amino-resins : | | | | 3920 93 10 | Rigid, plain | Free | | | 3920 93 20 | Flexible, plain | Free | | | 3920 93 90 | Other | Free | | | 3920 94 | Of phenolic resins : | | | | 3920 94 10 | Rigid, plain | Free | | | 3920 94 20 | Flexible, plain | Free | | | 3920 94 90 | Other | Free | | | 3920 99 | Of other plastics:
Plates, sheets, film, foil and strip of poly(vinyl acetate) : | | | | 3920 99 11 | Rigid, plain | Free | | | 3920 99 12 | Flexible, plain | Free | | | 3920 99 19 | Other
Film, sheets, strip of vinyl plastics : | Free | | | 3920 99 21 | Rigid, plain | Free | | | 3920 99 22 | Flexible, plain | Free | | | | | | | | 3920 99 29 | Other
Plates, sheets, strip, film or foil of copolymers of vinyl chloride and vinyl acetate : | Free | | | 3920 99 31 | Rigid, plain | Free | | | 3920 99 32 | Flexible, plain | Free | | | 3920 99 39 | Other
Sheet of Poly(tetrafluoro-ethylene) (PTFE) : | Free | | | 3920 99 41 | Rigid, plain | Free | | | 3920 99 42 | Flexible, plain | Free | | | 3920 99 49 | Other
Retro – reflective sheeting : | Free | | | 3920 99 51 | Rigid, plain | Free | | | 3920 99 52 | Flexible, plain | Free | | | 3920 99 59 | Other | Free | | | 3920 99 60 | Clicking boards for leather machinery
Other : | Free | | | 3920 99 91 | Rigid, plain | Free | | | 3920 99 92 | Flexible, plain | Free | | | 3920 99 99 | Other | Free | | | ______________________________________________________________________________________ | | 3921 | Other plates, sheets film , foil and strip, of plastics
Cellular : | | 3921 11 00 | Of polymers of styrene | Free | | | 3921 12 00 | Of polymers of vinyl chloride | Free | | | 3921 13 | Of polyurethanes | Free | | | 3921 13 10 | Flexible | Free | | | 3921 13 90 | Other | Free | | | 3921 14 00 | Of regenerated cellulose | Free | | | 3921 19 00 | Of other plastics | Free | | | 3921 90 | Other : | | | | 3921 90 10 | Thermocol
Of polymers of vinyl chloride : | Free | | | 3921 90 21 | Rigid, lacquered | Free | | | 3921 90 22 | Flexible, lacquered | Free | | | 3921 90 23 | Rigid, metallised | Free | | | 3921 90 24 | Flexible, metallised | Free | | | 3921 90 25 | Rigid, laminated | Free | | | 3921 90 26 | Flexible, laminated | Free | | | 3921 90 29 | Other
Of regenerated cellulose : | Free | | | 3921 90 31 | Rigid, lacquered | Free | | | 3921 90 32 | Flexible, lacquered | Free | | | 3921 90 33 | Rigid, metallised | Free | | | 3921 90 34 | Flexible, metallised | Free | | | 3921 90 35 | Rigid, laminated | Free | | | 3921 90 36 | Flexible, laminated | Free | | | 3921 90 39 | Other
Other : | Free | | | 3921 90 91 | Rigid, lacquered | Free | | | 3921 90 92 | Flexible, lacquered | Free | | | 3921 90 93 | Rigid, metallised | Free | | | 3921 90 94 | Flexible, metallised | Free | | | 3921 90 95 | Rigid, laminated | Free | | | 3921 90 96 | Flexible, laminated | Free | | | 3921 90 99 | Other | Free | | | ______________________________________________________________________________________ | | 3922 | Baths, shower-baths, sinks, wash-basins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics | | 3922 10 00 | Baths, shower-baths, sinks and wash basins | Free | | | 3922 20 00 | Lavatory seats and covers | Free | | | 3922 90 00 | Other | Free | | | ______________________________________________________________________________________ | | 3923 | Articles for the conveyance or packing of goods of plastics; stoppers, lids, caps and other closures, of plastics | | 3923 10 | Boxes, cases, crates and similar articles : | | | | 3923 10 10 | Plastic containers for audio or video cassettes, cassette tapes, floppy disk and similar articles | Free | | | 3923 10 20 | Watch-box, jewellery box and similar containers of plastics | Free | | | 3923 10 30 | Insulated ware | Free | | | 3923 10 40 | Packing for accommodating connectors | Free | | | | | | | | 3923 10 90 | Other
Sacks and bags (including cones): | Free | | | 3923 21 00 | Of polymers of ethylene | Free | | | 3923 29 | Of other plastics | Free | | | 3923 29 10 | Of poly (vinyl chloride) | Free | | | 3923 29 90 | Other | Free | | | 3923 30 | Carboys, bottles, flasks and similar articles : | | | | 3923 30 10 | Insulated ware | Free | | | 3923 30 90 | Other | Free | | | 3923 40 00 | Spools, cops, bobbins and similar supports | Free | | | 3923 50 | Stoppers, lids, caps and other closures | | | | 3923 50 10 | Caps and closures for bottles | Free | | | 3923 50 90 | Other | Free | | | 3923 90 | Other : | | | | 3923 90 10 | Insulated ware | Free | | | 3923 90 20 | Aseptic bags | Free | | | 3923 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3924 | Tableware, kitchenware, other household articles and toilet articles, of plastics | | 3924 10 | Tableware and kitchen ware : | | | | 3924 10 10 | Insulated ware | Free | | | 3924 10 90 | Other | Free | | | 3924 90 | Other : | | | | 3924 90 10 | Toilet articles | Free | | | 3924 90 20 | Insulated ware | Free | | | 3924 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3925 | Builders’ ware of plastics, not elsewhere specified or included | | 3925 10 00 | Reservoirs tanks, vats and similar containers, of a capacity exceeding 300 L | Free | | | 3925 20 00 | Doors, windows and their frames and thresholds for doors | Free | | | 3925 30 00 | Shutters, blinds (including venetian blinds) and similar articles and parts thereof | Free | | | 3925 90 | Other : | | | | 3925 90 10 | Of polyurethane | Free | | | 3925 90 90 | Other | Free | | | ______________________________________________________________________________________ | | 3926 | Other articles of plastics and articles of other materials of headings3901 to 3914 | | 3926 10 | Office or school supplies:
Office supplies of a kind classified as stationery other than pins, clips, and writing instruments : | | | | 3926 10 11 | Of polyurethane foam | Free | | | 3926 10 19 | Other
Other : | Free | | | 3926 10 91 | Of polyurethane foam | Free | | | 3926 10 99 | Other | Free | | | 3926 20 | Articles of apparel and clothing accessories (including gloves, mittens and mitts)
Gloves : | | | | 3926 20 11 | Disposable | Free | | | 3926 20 19 | Non disposable
Approns: | Free | | | 3926 20 21 | Of polyurethane foam | Free | | | 3926 20 29 | Other
Plastic stickers for garments : | Free | | | 3926 20 31 | Of polyurethane foam | Free | | | 3926 20 39 | Other
Collar stays, patties, butterfly, shoulder-pads and other stays: | Free | | | 3926 20 41 | Of polyurethane foam | Free | | | 3926 20 49 | Other
Other: | Free | | | 3926 20 91 | Of polyurethane foam | Free | | | 3926 20 99 | Other | Free | | | 3926 30 | Fittings for furniture, coach work or the like : | | | | 3926 30 10 | Of polyurethane foam | Free | | | 3926 30 90 | Other | Free | | | | | | | | 3926 40 | Statuettes and other ornamental articles :
Bangles : | | | | 3926 40 11 | Of polyurethane foam | Free | | | 3926 40 19 | Other
Beads : | Free | | | 3926 40 21 | Of polyurethane foam | Free | | | 3926 40 29 | Other
Statuettes : | Free | | | 3926 40 31 | Of polyurethane foam | Free | | | 3926 40 39 | Other
Table and other household articles (including hotel and restaurant) for decoration : | Free | | | 3926 40 41 | Of polyurethane foam | Free | | | 3926 40 49 | Other
Decorative sheets : | Free | | | 3926 40 51 | Of polyurethane foam | Free | | | 3926 40 59 | Other | Free | | | 3926 40 60 | Sequine
Other : | Free | | | 3926 40 91 | Of polyurethane foam | Free | | | 3926 40 99 | Other | Free | | | 3926 90 | Other : | | | | 3926 90 10 | PVC belt conveyor
Couplers, packing rings, O rings and the like; | Free | | | 3926 90 21 | Of polyurethane foam | Free | | | 3926 90 29 | Other
Lasts, with or without steel hinges ; EVA and grape sheets for soles and heels; welts: | Free | | | 3926 90 31 | Of polyurethane foam | Free | | | 3926 90 39 | Other
Rings, buckles, tacks, washers and other decorative fittings made of plastic used as trimmings and embellishments for leather products ; patterns for leather foot wear, leather garments and leather goods: | Free | | | 3926 90 41 | Of polyurethane foam | Free | | | 3926 90 49 | Other
Retro-reflective sheeting of other than of heading 3920 : | Free | | | 3926 90 51 | Of polyurethane foam | Free | | | 3926 90 59 | Other
Hangers : | Free | | | 3926 90 61 | Of polyurethane foam | Free | | | 3926 90 69 | Other
Plastic or nylon tipped hammers ; Insulating linear of nylon , HDPE : | Free | | | 3926 90 71 | Of polyurethane foam | Free | | | 3926 90 79 | Other | Free | | | 3926 90 80 | Polypropylene articles, not elsewhere specified or included
Other: | Free | | | 3926 90 91 | Of polyurethane foam | Free | | | 3926 90 99 | Other | Free | | | ______________________________________________________________________________________ | Import Licensing Notes 1. Procedure relating to import of plastic waste/scrap. Attention is invited to Para 27(2) of the Handbook of Procedures (Vol. l), 1992-97 (Revised Edition: March, l996) according to which import of all types of plastic wastes/scrap (except PET bottle waste/scrap) and animal dung or aimal excreta shall not, be permitted, except against a licence. The matter relating to grant of licences for import of such plastic wastes/scrap has been examined in consultation with the Deptt. of Chemicals & Petrochemicals and other Ministries and it has been decided to prescribe the following guidelines/conditions for consideration of applications for import of plastic wastes/scrap. Applicants who wish to submit applications to the Directorate General of Foreign Trade, Udyog hawan, New Delhi, for grant of licence for import of plastic wastes/scrap are required to
strictly comply with these guidelines/conditions. (i) Import of plastic wastes/scrap (except PET bottle waste/scrap) shall be permitted only against a licence. The description/definition of the plastic waste/scrap for this purpose would be: "Plastic scrap/waste constitute those fractions of plastics generated by various plastic processing operations or those fractions generated in the production process of plastics in a plant, which have not been put to any use whatsover and as such can be termed as virgin or new material which can be recycled into viable commercial products using standard plastic processing techniques but without involving any process of cleaning, whereby effluents are generated. (ii) Such virgin/new Plastic scrap/waste shall be permitted for import in the following forms i.e. compressed, films in cut condition, cut tape soft waste, flakes, powders, pieces of irregular shape (not exceeding the size of 3" x 3"). (iii) Any other category of plastic scrap/wastes which are not covered by the description/definition as given in sub-paras (i) and (ii) above shall not ordinarily be permitted. (iv) Applications for import licences would be received in the Headquarter of the DGFT as per procedure prescribed in this regard. DGFT would obtain comments on each application from the Deptt. of Chemicals & Petrochemicls and Ministry of Environment & Forests. Based on the comments of Deptt. of Chemicals &Petrochemicals and the Ministry of Environment & Forests, the individual cases shall be put up to the Special Licensing Committee (SLC) of DGFT for onsideration. (v) The plastic scrap/wastes conforming to the description indicated in sub-paragraphs (i) and (ii) above would be permitted only to the actual users who have the required facility for recycling such crap/waste and who are duly registered with the competent State/Central authority and also possess clear pollution clearance certificate from the concerned State Pollution Board where the unit is located, as well as a capacity assessment certificate. (vi) Each consignment of plastic scrap/wastes imported against an import licence issued in this regard shall be accompanied with a certificate from the factory in which it was generated to the effect that it conforms to the description/deinition as given in sub-paragraph (i) above. The importer of the plastic scrap/waste would also be required to furnish a declaration to the Customs authorities at the time of clearance of goods, certifying that the plastic scrap/wastes imported by him and for which clearance is being sought, strictly conforms to the description /definition as given in sub- paragraph (i) and (ii) above and that it is free from any kind of toxic/non-toxic contamination and has not been put to any previous use, whatsoever. (vii) Before the clearance of the plastic waste/scrap, all imported consignments of such plastic crap/waste shall be subjected to scrutiny and testing of samples. Customs authorities shall for this purpose draw a sample and send the same to the nearest laboratory/Office of the Central Institute of Plastic Engineering & Technology (CIPET) with a view to having the same analysed and verified that such imported consignments are in conformity with the description/definition as given in sub-paragraph (i) and (ii) above. (viii) Special Licensing Committee while considering import take into account, the quantity and value of plastic wastes/scrap imported by the applicant during the previous licensing years. (ix) In case of misdeclaration regarding the material being free from any toxic/hazardous substances by the importer, action as per laws of Ministry of Environment and Forests applicable under the Environment (Protection) Act for committing offences leading to damage of environment and increase in pollution in the country, as modified and in force from time to time, would be taken by the competent authority.For any other misdeclaration, laws formulated by the Directorate General of Foreign Trade, in force from time to time, would also apply and action as per Foreign Trade (Development and Regulation) Act, 1992 shall be initiated by the competent authority. (x) Import licences issued in accordance with this Public Notice shall be subject to Actual User condition and any other such condition as may be imposed by the Special Licensing Committee. 2. The guidelines and conditions contained in Para l (i) (ii) (iii) (v) (vi) (vii) (ix) shall also be applicable to the imports made under the Duty Exemption Scheme against Advance Licence. Applications
for Advance Licences for the import of plastic wastes and scrap shall in this case be considered by the Advance Licensing Committee DGFT (H.Q.) in accordance with the guidelines laid down in Para l(iv) and l(viii) above, and licences issued subject to Actual User condition. 3. While imports of plastic wastes and scrap by l00% EOUs and units in the EPZ shall continue to be governed by the provisions of para 94 of the Export and Import Policy, the parameters for import of plastic wastes/scrap as specified I this Public Notice shall however be kept in view by the Board of Approval concerned while approving such units under the Scheme. 4. The import PET bottle waste/scrap shall continue to be freely importable as hitherto. ANNEXURE TO PUBLIC NOTICE NO.392(PN)/92-97 DATED lst January, 1997 PLASTIC TESTING FACILITIES ARE AVAILABLE AT THE FOLLOWING CIPET CENTRES | 1 | Director
CIPET, Guindy
Madras -
| (Code -044)
2342371-74
600 032 & 2345876
2347120(FAX) | | 2 | Dy. Director
CIPET Extn. Centre
Plot No 630,Phase-IV
GIDC, Vatva Ahmedabad | (Code - 079)
5832267 (D)
5830569 (O)
5835219 (O)
5835236 (FAX) | | 3 | Dy. Director
CIPET Extn. Centre
P.O. Rayon & Silk Mills
Adjacent to GND University
Amritsar - 143 104. | (Code 0183)
258938(D)
257397(O)
258671(FAX)
| | 4 | Sr. Manager (Project )
CIPET Extn. Centre
B-25, Chandka Nucleus
Indl. Complex, P.O. Patia
Bhubaneswar - 751 031 | (Code-0674)
440463(D)
440162(O)
4404613(FAX)
| | 5 | Sr. Manager (Project)
CIPET Extn Centre
(Near J.K. Batteries)
Sector C, Govindpura
Industrial Estate
Bhopal | (Code-0755)
589041(D)
587454(O)
588288(O)
589041(FAX)
| | 6 | Senior Manager (Project)
ŠCIPET Extn. Centre
Post Bag No.
Cherlapally Industrial
Development Area, Phase-III
HCL Post, Hyderabad-500 051 | (Code- 040)
7124040 (D)
3 7123615 (O)
7123750 (O)
7124041 (O)
7124051 (FAX)
| | 7 | Project-in-charge
CIPET Extn. Centre
Kelshampet
Airport Road
Imphal - 795 001 | (Code- 03852)
23158(O)
22870 (S)
23158(FAX)
| | 8 | Dy. DirectorCIPET Extn. Centre
B-27, Amsausi Indl. Area
(Nadar Ganj)
Lucknow - 226 008
| (Code-0522)
437646 (D)
436910 (O)
437645 (O)
437647 (O)
436227 (FAX)
437646 (FAX) | | 9 | Dy. Director
CIPET Extn. Centre
437/A, Hebbal Indl. Estate
Mysore - 570 016 | (Code- 0821)
403147 (D)
403018 (O)
402349 (O)
402350 (FAX) | OFFICE; DIRECT; SHED; (PUBLIC NOTICE NO. 392 (PN)/92-97 DATED THE lst January, l997) |
R
