Offer Details

Enquiry No. : 7083158 Dhaka (Bangladesh)

Description :Dear Sir,
We are looking this product Specification are given below :
Specification For Gilding Metal Clad Steel Sheet.( G.M.C.S. Strip)
For
Carts Case Ball T- 56
Carts case Tracer T-56
Size = 3.1- 0.1x139.5-2x750-2000mm
Specn. No WJ 643 72
Technical requirements:

Coating Gilding metal (Brass 90 Clad on both Sides)
Chemical Composition of coating:
Copper = 88 ~ 91%
Zinc = Remainder

The thickness of Brass 90 sheet for each side should be 3.4 to 4%
of the thickness of the flat steel.

Base metal: Hot rolled flat steel
Steel No. F- 18
Spec. No. YB 482- 64

Technical requirements:
Base metal Composition:
C = 0.11- 0.19%, Mn = 0.35- 0.55%
A1= 0.02- 0.08%
Si = Not More than 0.06%
Cr = Not more than 0.15%
Cu = Not more than 0.20%
S = Not more than 0.04%
P = Not more than 0.035%
Ni = Not more than 0.030%
Total Sulfur + phosphorus =
Not more than 0.07%
Mechanical Properties
Ultimate tensile Strength = 31~40 kg/ mm2
Elongation e 29%
Source: China Russia & West European Countries.
OR
Size = 3.1- 0.1x139.5-2x750-2000mm
Technical requirements:
Coating Gilding metal (Brass 90 Clad on both Sides)
Chemical Composition of coating:
Copper = 88 ~ 91%
Zinc = Remainder

The thickness of Brass 90 sheet for each side should be
3.4 to 4% of the thickness of the flat steel.

Base metal: Hot rolled flat steel
Steel No. F- 18
Technical requirements:
Base metal Composition:
C = 0.11- 0.19%, Mn = 0.35- 0.55%
A1= 0.02- 0.08%
Si = Not More than 0.06%
Cr = Not more than 0.15%
Cu = Not more than 0.20%
S = Not more than 0.04%
P = Not more than 0.035%
Ni = Not more than 0.030%
Total Sulfur + phosphorus =
Not more than 0.07%
Mechanical Properties
Ultimate tensile Strength = 31~40 kg/ mm2
Elongation e 29%
Please Quote us your Best Price urgently.

Best Regards,