Offer Details

Enquiry No. : 6012337 Pennsylvania (USA)

Description :Attn: Mills and Mill Agents Only

We can purchase up to 10,000 MT per month (2 x 5000 MT
shipments-one for West Coast and One for the U.S. Gulf)
of the following sizes of angles.

Grade must be equivalent to yield and tensile of ASTM
grades indicated, and must be marked accordingly on the
tags/bundle and on the mill test certificates (ASTM A529
Grd 50/A36/A6). If you need copies of the ASTM spec,
please advise.

The lengths of 12.2 m and 15.15 meter are a big part of
the specification.

Please advise if you can produce and at what price (USD)
per size, w/latest ship date from receipt of LC. You can
quote Stowed or CFFO Houston (5000 MT and Los
Angeles, Calif.(5000 MT).

Packing: The angles will have to be packaged w/uniform
piece count, bundled and banded and then wrapped in
water proof paper and banded/tagged-marked again.
Item: Prime Angles

Bdl. wt: 2 MT-20 (6.1m), 4 MT-30-50 (9m-1515m) (Wrapped)

Length tolerance: -0/+4 Inches (+/-100 mm)
Tolerance Leg: +5%/-5%
ASTM A36 and ASTM A529 Grd 50 (50,000 PSI)(Dual Certified)

1 x 1 x .109 x 20/40
25 x 25 x 2.75 x 6.1/12.12 M

1 x 1 x .118x 20
25 x 25 x 3.00 x 6.1

1 x 1 x .177 x 20
25 x 25 x 4.50 x 6.1

1.25 x 1.25 x .109 x 20/40
31.75 x 31.75 x 2.75 x 6.1/12.12

1.25 x 1.25 x .118 x 20/40
31.75 x 31.75 x 3.00 x 6.1/12.12

1.25 x 1.25 x .177 x 20/40
31.75 x 31.75 x 4.50 x 6.1/12.12

1.5 x 1.5 x .109 x 20/40
38.1 x 38.1 x 2.75 x 6.1/12.12

1.50 x 1.50x .118 x 20/40
38.1 x 38.1 x 3.00 x 6.1/12.12

1.50 x 1.50 x .135 x 20/40/50
38.1 x 38.1 x 3.40 x 6.1/12.12/15.15

1.50 x 1.50 x .155 x 20/40
38.1 x 38.1 x 3.80 x 6.1/12/12

1.50 x 1.50 x .177 x 20/40/50
38.1 x 38.1 x 4.50 x 6.1/12.12/15/15

1.50 x 1.50 x .240 x 20/40/50
38.1 x 38.1 x 6.00 x Same

1.75 x 1.75 x .155 x 20/40/50
44.4 x 44.4 x 3.80 x Same

1.75 x 1.75 x .177 x 20/40/50
44.4 x 44.4 x 4.50 x Same

1.75 x 1.75 x .240 x 20/40/50
44.4 x 44.4 x 6.00 x Same

2 x 2 x .118 x 20/40
50 x 50.0 x 3.00 x 6.1/12.12

2 x 2 x .177 x 20/40/50
50 x 50.0 x 4.50 x 6.1/12.12/15/15

2 x 2 x .240 x 20/40/50
50 x 50.0 x 6.00 x same

Note: We have demand for ASTM A36 squares
(12.7.19.0,25.7,50 mm x 6.1m) and a variety of smaller flats
(25mm,31.75 mm, 38 mm, 50, mm x 3/4.5/6.0 thickness x 6.1 m
lengths) that we can pursue later.
We would first like to see you price structure on the angles
(above).

We presently also have requirements for 2000 MT of steel flats
(Size combination): .135 inch/.185/.240/.375/.500/.625 x 5 inch /6
and 8-2,000 MT per month. The flats must be ASTM A36,
w/tolerance to ASTM A6.

Metric Sizes: Large Flats- (Thickness)-3.42/4.6/6.1/9.3/12.7/15.875mm
x (widths)127 mm/152mm/203mm x 6.1m or 12.12 m.)

Please provide a price indication stowed, w/port and min load rate
or CNFFO Houston, Texas.
Looking forward to hearing from you.