Offer Details

Enquiry No. : 6062442 Dhaka (Bangladesh)

Description :We are very much interested to import "82,000 Liter
Transformer Oil" C&F Chittagong on emergency basis

Technical specification of transformer oil:

A) The Oil will be used for work in oil-cooled Transformer
and Electrical Apparatus with voltage up to 110 KV Working
temperature + 115 Degree C.
B) Type: Mineral
C) Supplied condition: After centrifusing
D) The centrifused Transformer Oil I. E. Supplied Transformer
Oil must have the characteristics mentioned below:

01) Density at 20 degree C GM/cm3: _< 0.895
02) Flash point (minimum):140 degree C
03) Pour Point: -30 degree C
04) Kinematic viscosity at 20 degree C (maximum):30 CST
05) Kinematic viscosity at-10 degree C (maximum):240 CST
06) Acidity (neutralization value):0.05 mg KOH/g
07) Corrosive Sulpher: Non- corrosive
08) Sludge Value (maximum): Non- sluding
09) Mechanical Impurities: Nil
10) Tan, di-electric loss angle at 50H20 degree C (maximum): 0.2%
11) Di-electric Strength: When tested with GST/VDE electrodes,
the gap between the electrodes being 2.5 mm, the break-down
voltage must not be less than 50 KV (rms)
12) Water Content:

A) By Crackling Method: Nil
B) By Karl Fisher Method: 14 PPM (maximum)
E) Standard: GOST- 982-68 or DIN 51507 (V DE 0370/10) or
(For untreated Oil) As per IEC-296 (Class I) & BS 148/84
or its equivalent.
F) Packing: New Steel Drums should be suitably packed to
prevent damage during transportation and to ensure water
content mentioned in SL. No.12. Each drum should contain 205
(Two hundred five) liters

Please confirm urgent your best possible quotation on C&F
Chittagong basis in order to finalize the deal favoring
yourself and do not hesitate to contact us for further
inquiries. And you must send us your complete contact details
including your company name, address, Mobile, phone &
Fax number, website etc. For our better communication