Enquiry No. : 8110670 FL (USA)
Description :Tubular steel poles for overhead power lines, require ISO-2000
standard, 7.4m tall, two pieces swaged, nomial 2KN
Painted steel
Poles are required in two sections shall be of steel swaged (completed
when hot) type
Require taper plug and base plate, poles shall be 18mm dia through
holes at 150mm, 350mm, 550mm and 750mm from the pole top
90 degrees cross angles.
System Low Voltage
Pole Length 7.5m (410 SP-9)
Nominal 2 KN (Minimum)
Longitudinally welded tube sections of hot rolled structural carbon
steel mechanical strengths: tensile strength 410 MPa, yield strength
240 MPa
Must be in two sections as receiving country must transport via
hand cartage.
We can supply diagrams as well upon receiving response.
Thank you,