Enquiry No. : 6110494 Baghdad (Iraq)
Description :Dear Ms. Sangeeta,
Good day
Many thanks for your introduction letter dated on 24 October
and we're pleased to set a long term business relationship
with Indian manufacturing companies and to promote and
published our inquires through your firm . Through our commercial
expertise I think that Chinese companies are strong competitive to
you in global markets .
We've now three inquiries for 1000 MT of H.D. Galvanized steel
coils , 100 MT of cold drawn steel wires 4 mm size and 400 MT
of un drawn steel wire 5.5 mm size designed for core wires
of welding electrodes according to listed below specifications.
Please, publish these inquiries at your site in order to
obtained a competitive prices note that prices should based on
CIF Um-Qaser Iraqi seaport price bases
With Regards
Specifications of 1000 MT of Galvanized steel coils sheets
for air coolers:-
Dimensions and Quantity:-
1- 0.70 X 1250 mm 460 MT
2- 0.80 X 1250 mm 450 MT
3- 1 X 1250 mm 50 MT
4- 1.25 X 1250 mm 10 MT
5- 1.50 X 1250 mm 30 MT
1-Quality:- Lock forming quality ( LFQ) , according to the
American Society for testing Materials (ASTM) 527A ,
class G 90 ? hot dipped galvanized steel ? Coils or sheets .
2-Bass metal:- steel of the following composition ,
C (max.) = 0.15
Mn (max.) = 0.06
P (max.) = 0.035
S (max.) = 0.040
3-Coating:- 180 gm / m ? , zinc coating on each side .
4- Surface protection: - Lightly oiled .
5- Treatment: - No chemical treatment, not passifated ,
minimum sprangles ( smooth) , no silicon compound
( for galvanizing ) .
Tolerance:-
A ) Tolerances for width of coil :
(Width of coil according to order tolerances ( - 0 , + 1 ).
B ) Tolerances for thickness as following :
For thickness 0.70 - 1 mm ? 0.05
For thickness 1.25 mm ? 0.06
For thickness 1.50 mm ? 0.07
Coil specification :-
Max. outside diam. 1100 mm .
Min. outside diam. 1000 mm .
Max. inner diam. 520 mm .
Min. inner diam. 510 mm .
Max. Weight of coil not to exceed 5 MT
Note:-
1- Thickness, weight and width should be clearly marked on
the outside of each coil.
2- Packing: Standard export packing, water-proofed , covered
from outside and inside with suitable protector , and wrapped
with hoops .
Specification for coils of 4 mm drawn steel wire:-
4 mm Cold drawn Bright basic steel , soap drawn .
Tensile strength:- 35 to 95 kg / mm?
Dia. Tolerance: - ? 0.10 mm
Chemical composition ( JIS G3505 / SWRM 8 ):-
C max. 0.1 % , Mn max 0.6 % , P max. 0.045 %,
S max. 0.045 % .
Coils specifications:-
Weight of coil 180 to 200 kg Max
Max outside dia. 850 mm
Max. inside dia. 650 mm
Min. inside dia. 250 mm
Quantity required :- 100 MT
Packing:-
To be wrapped with nylon sheets or , similar protection from
rust . The surface of steel wire should be free from rust,
flow cracks , or other dangerous defects .
Specifications of 400 MT of Un drawn steel wire designed
for core wire of welding electrodes
Chemical Analysis
C 0.04 to 0.10 %
Si 0.05 to 0.10 %
Mn 0.40 to 0.60 %
P 0.030 % Max
S 0.030 % Max
Cr 0.10 % Max
Ni 0.10 % Max
Mo 0.10 % Max
Cu 0.15 % Max
V 0.02 % Max
As 0.05 % Max
Sn 0.03 % Max
Al 0.02 % Max
(Cr plus Ni plus Mo) 0.2 % Max
(Sn plus Sb plus Pb plus As plus P plus S ) 0.15 % Max
Quantity 400 MT
Special conditions
1-The analysis refers to finished materials
2-A work certificate should be accompanied with the delivery
3-Heat number, wire diameter, manufacturers name , as well
as Hilal's type designation should be clearly marked on all
coils on metallic working tables.
4-Diameter allowance for rolled wire ( ? 0.30 mm ).
5-Out of round less than ( 0.40 mm ).
6- a ) : weight of coils is about ( 500 Kg) , and each coil
shall be well tied with five steel ties.
b ): If coils are delivered in bundles , the weight of each
bundle should be about (1500 Kg) , and tied properly with six
steel ties.
7- Minimum inner diameter of coil (850 mm).
Max inner diam. of coil (950 mm).
Max . outer diam.. of coil (1250 mm).
8-The wire shall be free from mechanical defects such as:
pipe , burns , fins , cold , lapping and other faults which
can hamper its use in further processing.
9-The wire shall be free from rust and dirt.
10-If spliced coil technique is used, one splice per coils can
be accepted .
11-Scale contents (Oxide on surface) Min. 0.7 % , Max. 1.0 %.
12-The tensile strength RM approx. ( 400 N/mm ?)
13-The wire shall be suitable for mechanical descaller unit.
14-Fix the diameter of un drawn wire (5.5 mm) on the metallic
marking labels and in different colors if possible.
15-Fix the approximate weight for each bundle with cast No?.
16-Inspection certificate for each shipment issued by third
party ( LIOYDS , SGS ?.etc. ) with shipment giving full
analysis for all above point.