Offer Details

Enquiry No. : 7091233 Philadelphia (USA)

Description :Attn: Mills and Mill Agents (Only). We will not reply to
brokers/traders.

Re: Firm Inquiry

Note: If price is greater than USD $520/MT FOB
or more than USD $600/MT CNF Baltic or Meditterranean Port,
please do not offer.

Inquiry #1: 7200 MT.

Prime Newly Produced Hot Rolled Coils
S235 JRG2 and S235Q1 (modified) as per EN10025
Si: 0.03% max. and Si + 2.5 P = 0.09 % max.,. suitable for galvanized
Application Al: 0.02 % min.

S275 JO as per EN10025
Si: 0.03% max. and Si + 2.5 P = 0.09 % max.,. suitable for
galvanized application
Al: 0.02 % min.
Equivalent C (CEV): 0,40 % max.

S355 MC as per EN10149,
Si 0.15 * 0.25 % suitable for galvanized application class 3
Equivalent C (CEV): 0.40 % Max.

S355 J2G3 as per EN10025,
Si 0.15 * 0.25 % suitable for galvanized application class 3
Equivalent C (CEV): 0.40 % Max, Tensile strength (RM):
510 N/mm2 min. and elongation min. 23 % and for 7.64 and 9.66 mm
nominal thickness resilience have to be: min. 27J -20C

Tolerances acc. to EN 10051 (aiming � of EN 10051)
Mill's edges: 0/+20 mm
ID: 760 mm +/- 53 mm
OD: 2000 mm max.
CW : 15 +/- 3 Kg per mm width
End use: pipe making
Mill test certificates according to EN 10204/3.1

Specification & Size
S275 JO
100 MT 3.81 x 1,155 mm
150 MT 3.72 x 1,515 mm
350 MT 4.62 x 1,485 mm
500 MT 5.63 x 1,530 mm
100 MT 9.66 x 1,085 mm
125 MT 9.66 x 1,500 mm
1425 MT

S355J2G3
325 MT 3.72 x 1,515 mm
350 MT 4.62 x 1,510 mm
100 MT 5.63 x 1,530 mm
150 MT 7.64 x 1,500 mm
925 MT

S235 JRG2
100 MT 2.30 x 1,331 mm
400 MT 2.50 x 1,143 mm
100 MT 2.55 x 1,261 mm
400 MT 2.55 x 1,365 mm
200 MT 2.90 x 1,324 mm
200 MT 2.95 x 1,395 mm
1400 MT

S235Q1
100 MT 2.15 x 1,330 mm
150 MT 2.40 x 1,330 mm
200 MT 2.65 x 1,261 mm
300 MT 2.90 x 1,324 mm
500 MT 2.95 x 1,356 mm
250 MT 3.45 x 1,351 mm
150 MT 3.65 x 1,452 mm
1750 MT

S355MC
100 MT 3.65 x 1,452 mm
150 MT 4.55 x 1,446 mm
150 MT 5.55 x 1,440 mm
100 MT 3.30 x 1,351 mm
500 MT

S235 JRG2
400 MT 2.85 x 1,499 mm
200 MT 3.77 x 1,499 mm
200 MT 4.73 x 1,398 mm
400 MT 4.73 x 1,499 mm
1200 MT

Inquiry # 2: 5000 MT

Prime Newly Produced Hot Rolled Coils grade S235JRG2 acc to
EN 10025, un pickled, unoiled, without any tension and/or welds
and/or coil breaks and/or scratches and/or other surface defects,
suitable to be pickled, from continuous casting.
Coils might be supplied with fish tongue and tail up to 3/4 of the
width. Si 0.04 % maximum (minimum 85 % in 0.03 % max.) suitable
for galvanized application, Al killed
Tolerances acc. to EN 10051
Thickness tolerances: acc. to EN 10051
Mill's edges: 0/+20 mm
ID: 760 mm +/- 53 mm
OD: 2000 mm max.
CW : 14 -25 MT
End use: cut to length and/or pickling application
Quality certificates acc. to EN 10204/3.1.B

Specification & Size
Grade S235JRG2
Size MM M/T
2.50 x 1015mm 100mt
3.00 x 1015mm 750mt
4.00 x 1015mm 400mt
5.00 x 1015mm 100mt
6.00 x 1015mm 450mt
8.00 x 1000mm 400mt
10.0 x 1000mm 1,000mt
12.0 x 1000mm 250mt
4.00 x 1265mm 100mt
5.00 x 1265mm 100mt
6.00 x 1265mm 100mt
8.00 x 1250mm 200mt
10.0 x 1250mm 100mt
2.50 x 1500mm 150mt
3.00 x 1515mm 800 MT
Total 5000 MT

Looking forward to your offer.
Thank you, Sincerely,