Offer Details

Enquiry No. : 8072477 Cairo (Egypt)

Description :Dear Sir,
We require the following items:
Malleable cast iron fitting (Black): QTY.

90 Elbows Third. F/F 1/2'' 3000
90 Elbows Thrd.F/F 3/4'' 10000
90 Elbows Thrd.F/F 1'' 20000
90 Elbows Thrd.M/F 1/2'' 3000
90 Elbows Thrd. M/F 3/4'' 5000
90 Elbows Thrd. M/F 1'' 10000
Hexagonal Thrd. Nipples 1/2'' 1000
Hexagonal Thrd.Nipples 1'' 10000
Hexagonal Thrd.Nipples 3/4'' 5000
Caps Thrd.Ends 3/4'' 5000
Caps Thrd.Ends 1'' 10000
Plugs Thrd. Ends 1/2'' 5000
Plugs Thrd. Ends 3/4'' 5000
Plugs Thrd. Ends 1'' 10000
Equal Tee Thrd. Ends 3/4'' 5000
Equal Tee Thrd. Ends 1'' 10000
Equal Tee Thrd. Ends 2'' 1000
Coupling Thrd.Ends 1/2'' 1000
Coupling Thrd.Ends 3/4'' 3000
Coupling Thrd Ends 1'' 10000
Coupling Thrd End 2'' 500
Reducing Coupling 2''x1'' 1000
Union Taper Seat (Brass To Iron Seat) Thrd, Ends F/F 1/2'' 1000
Union Taper Seat (Brass To Iron Seat) Thrd, Ends F/F 3/4'' 5000
Union Taper Seat (Brass To Iron Seat) Thrd, Ends F/F 1'' 10000
Union Taper Seat (Brass To Iron Seat) Thrd. Ends M/F 1/2'' 1000
Union Taper Seat (Brass To Iron Seat) Thrd.Ends M/F 3/4'' 2000
Union Taper Seat (Brass To Iron Seat) Thrd.Ends M/F 1'' 15000
Union Taper Seat Thrd. Ends M/F 2'' 1200
Reducing Bushing Thrd. Ends 1''x3/4'' Black 1000
Reducing Bushing Thrd. Ends 2''x1'' Black 1000
Cross Scr 1'' 1000
Cross Scr 2''x1'' 1000

Welded carbon steel pipes which are according to British standards
and used in gas distributions.
Technical specifications: "Welded Carbon steel gas pipe Medium series
according to B.S.
1387-Black
Threaded ends according to B.S. 21 and EN 10255-04
Certificates (English) according to EN 10204/3.1.b
Plain straight cut ends (without threading).
Hot stretch reduced.

Dimension. Qty.
?" inch 250,000 meters
3/4" inch 350,000 meters

Wall thickness 2.6 mm
Length 6 meter.
Delivery term: C&F Alexandria port
Please give us price by the length, price per meter.
Please note the additional required specifications:
Long welded pipes, manufactured to EN 10255-04 (formerly as BS1387)
medium series, steel
S195T.
- Plain straight cut ends (without threading), black pipes.
- Hot stretch reduced.
- internal weld seam not removed.
- Externally slightly oiled for temporary transit protection.
100% Hyrotested and 100% Eddy current tested.
- All pipes to pass bending test of four directions from seam with
bending radius 44mm for 1/2"
bending radius 66mm for 3/4.
- The result shall show neither flattening nor split at the seam.
- Pipe to be in hexagonal bundles of max 1.5 metric tones.
- Pipe to have standard mill marking.
- Customer shipment mark to be on bundle tags (minimum 2 tags per bundle)
- Length 6000/64000 mm + 100/-0 mm
- Quality certificate EN 10204/3.1.

A-specification for pipe clamps 1/2 inch (complete set) consist of
the following:

1- 1/2 inch clamp (face) without welded nut.
2- 1/2 inch clamp (back) with welded M8 nut.
3- 2 screw M6 x 16mm (for assembling the face with the back.)
4- C/W double threaded screw M8 + fisher for M8
5- C/W nut M8.
6- C/W washer M8.

Note: the outer diameter for the pipes 1/2" 28mm-30mm

B-specification for pipe clamps 3/4 inch (complete set) consist of the following:
1- 3/4 inch clamp (face) without welded nut.
2- 3/4inch clamp (back) with welded M10 nut.
3- 2 screw M6 x 16mm (for assembling the face with the back.)
4- C/W double threaded screw M10* 120mm + fisher for M12
5- C/W nut M10.
6- C/W washer M10.

Note: the outer diameter for the pipes 3/4" 32.5mm-34.2mm

C- Specification for the attached picture (double threaded screw+ fisher)
(complete set) consist of the following:
1-qty. of 2 double threaded screw size: M10 * 140mm.
2- qty. of two nuts M10 for the Double threaded screw.
3- C/W two plastic washers.

Please refer to the attached file.

Please advice your best prices, available quantities , payment terms
and period of delivery.
Best regards