Offer Details

Enquiry No. : 8072355 Cairo (Egypt)

Description :Dear Sir,
A-specification for pipe clamps 1/2 inch (complete set) consist of
the following:

1- 1/2 inch clamp (face) without welded nut.
2- 1/2 inch clamp (back) with welded M8 nut.
3- 2 screw M6 x 16mm (for assembling the face with the back.)
4- c/w double threaded screw M8 + fisher for M8
5- c/w nut M8.
6- c/w washer M8.

Note: the outer diameter for the pipes 1/2" 28mm-30mm

B-specification for pipe clamps 3/4 inch (complete set) consist of
the following:
1- 3/4 inch clamp (face) without welded nut.
2- 3/4inch clamp (back) with welded M10 nut.
3- 2 screw M6 x 16mm (for assembling the face with the back.)
4- c/w double threaded screw M10* 120mm + fisher for M12
5- c/w nut M10.
6- c/w washer M10.

Note: the outer diameter for the pipes 3/4" 32.5mm-34.2mm

C- Specification for the attached picture (double threaded screw+ fisher)
(complete set) consist of the following:
1-qty. of 2 double threaded screw size: M10 * 140mm.
2- qty. of two nuts M10 for the Double threaded screw.
3- c/w two plastic washers.

Thanks best regards