Offer Details

Enquiry No. : B-116717 Verona (Italy)

Description :Urgent request for quotation

Dear Sir/Madam,

I contact you because ours, Italian trading company specialized in
international tenders, is looking for a tender financed by
World Bank in Kenya, for a manufacturer able to provide us
various items that could be of your production.

Technical requirements and quantities are the following:

BCEE 137
Lot 1
Cross-cut saw

Use: Making crosscuts.
Standard:
? BS 3159-1
Description:
10 to 12 point for fine work a
7 or 8 point for faster cutting.
Ten teeth per inch for general purpose,
12-point used for cabinet work.
Teeth shaped like knife points to crumble out wood between cuts.
Best cutting angle is about 45?.
Blade lengths range from 20" to 28" (508mm to711mm)

Quantity=10

BCEE 138
Lot 1
Rip saw

Use: Cutting timber parallel to the direction of the grain

Standard:
BS 3159-1
Description:
Chisel shaped teeth,
? teeth per inch,
Made to cut with the wood grain.
Blade length: from 24" to 28" (610mm to 711mm)
Teeth are cross-filed
Cutting angle at 60? angle to the surface of the board being cut.
The ripping action of the saw produces a coarse, ragged cut
which makes the saw unsatisfactory for finish work.

Quantity=10

BCEE 139
Lot 1
Tenon saw

Use: Cutting across the grain
Standard:
BS 3159-1
Description:
The stiffened edge may be made of metal or wood
Has rip-filed teeth for rip cutting and cross-cut for cutting across the grain.
Fine teeth, with 13 teeth per inch

Quantity=10

If available, I kindly ask you to reply to my email within Sunday \
evening including the following information:

Quotation ex-work;
A brochure in English of offered goods;
Origin of offered goods.

Since this is for a tender I kindly ask you to offer a model
compliant to all requirements or better.

I remain at your disposal for any other information you may need.

I look forward to receive your reply and confirm of your interest
in the quotation.

Best regards,
Urgent request for quotation

Dear Sir/Madam,

I contact you because ours, Italian trading company specialized in
international tenders, is looking for a tender financed by
World Bank in Kenya, for a manufacturer able to provide us
various items that could be of your production.

Technical requirements and quantities are the following:

BCEE 137
Lot 1
Cross-cut saw

Use: Making crosscuts.
Standard:
? BS 3159-1
Description:
10 to 12 point for fine work a
7 or 8 point for faster cutting.
Ten teeth per inch for general purpose,
12-point used for cabinet work.
Teeth shaped like knife points to crumble out wood between cuts.
Best cutting angle is about 45?.
Blade lengths range from 20" to 28" (508mm to711mm)

Quantity=10

BCEE 138
Lot 1
Rip saw

Use: Cutting timber parallel to the direction of the grain

Standard:
BS 3159-1
Description:
Chisel shaped teeth,
? teeth per inch,
Made to cut with the wood grain.
Blade length: from 24" to 28" (610mm to 711mm)
Teeth are cross-filed
Cutting angle at 60? angle to the surface of the board being cut.
The ripping action of the saw produces a coarse, ragged cut
which makes the saw unsatisfactory for finish work.

Quantity=10

BCEE 139
Lot 1
Tenon saw

Use: Cutting across the grain
Standard:
BS 3159-1
Description:
The stiffened edge may be made of metal or wood
Has rip-filed teeth for rip cutting and cross-cut for cutting across the grain.
Fine teeth, with 13 teeth per inch

Quantity=10

If available, I kindly ask you to reply to my email within Sunday \
evening including the following information:

Quotation ex-work;
A brochure in English of offered goods;
Origin of offered goods.

Since this is for a tender I kindly ask you to offer a model
compliant to all requirements or better.

I remain at your disposal for any other information you may need.

I look forward to receive your reply and confirm of your interest
in the quotation.

Best regards,